Process Therm recovers heat from dust-loaded air. The recovered heat is typically used for pre-heating incoming air, but can also be used to produce for example district heating. Process Therm can be installed in new plants or easily retrofitted into existing plants.
The open space between the thermo plates ensures that the Process Therm manages the dust-loaded air well, and that the unit can be run at a low air pressure drop(< 500 Pa). Condensation of moisture increases the amount of recovered heat and thereby gives you a faster return on investment.
The CIP nozzles on top of the exchanger ensure that plates are easy to clean without expensive interruptions during production.
Flowproen can deliver anything from a single Process Therm unit to a complete package including transition pieces, pre-heater and pump station for the circulation water.
We can also advise on other purposes of Process Therm like the production of district heating.
Product advantage:
Maintenance-free in dust loaded air.
No expensive interruptions since cleaning takes place during production through CIP system.
Faster return on investment.
Low maintenance cost.
Compact design and simple installation.
Good thermal operating efficiency due to high heat transfer coefficients.
Enhanced heat recovery through condensation of moisture.
Long life due to stable and durable corrosion resistant materials.
Air flow from 000 to 300.000 kg/h.
Heat duty from 50 kW to 10 MW.
Fields of application:
All processes with the presence of large amounts of dust in the discharge air (such as spray dryers)
For example in food, chemical, wood, paper and textile industries.
