Flowproen present at the “Energy Efficiency Expo 2022”

From August 25th to 27th, Flowproen was present again at the ” “Energy Efficiency Expo 2022”

During the entire exhibition, more than 500 people visited our booth and talked with the Flowproen team about their products, services and energy efficiency solutions.

We were also able to talk with colleagues and professionals from other booths about the importance of energy saving and environmental care in the national industry.

In the main auditorium our CEO Andres Barco presented a success story with our customer Retak who accompanied us and gave technical specifications of what was achieved with our equipment and the benefits in their plant in the province of Entre Rios.

We have quality products that adapt to the needs of each customer and are aimed at a wide range of industrial sectors. Our international suppliers guarantee the quality of the products we use.

We are the solution for your production processes.

Read More

Work in Femsa’s high pressure compressor room

At Flowproen we are working at the Femsa Plant (Monte Grande, Province of Buenos Aires, Argentina) in the auxiliary services sector of the plant, to audit and detect improvements in the reduction of operating costs and emissions to the environment.

The objective of the work is to survey the process and propose improvements to the installations of the different services (water, steam, effluents, air, among others)

Flowproen’s team is performing analysis, evaluation and implementation work to meet the project objectives. Providing technical assistance, advising our client to ensure a correct implementation.

Once the work is completed, we deliver a detailed technical report with the improvement proposals at the process level, with the preparation of complete P&ID drawings.

Thank you Femsa for trusting Flowproen to provide energy saving and environmental care solutions.

Read More

Refrigeration System

Our brazed plate heat exchanger is an indispensable element of the refrigeration system.

Read More

General Industries – Rinsing Process

In order to clean/wash/rinse the product effectively, hot water is supplied heating up theough the heat exchanger.

These applications are often seen in the bottling process, plate glass process and so on.

Read More

Instrumentation and Control.

At Flowproen we specialize in providing solutions to industries by reducing costs and optimizing processes.

We present our Instrumentation and Control business unit.

Instrumentación:

  • Selection of instruments for process control and optimization.
  • P&ID design.
  • Installation, configuration and commissioning.
  • Calibration.

Process control:

  • Selection of the process control system according to the needs and scale of the process.
  • Programming of systems based on PLC and DCS Siemens, Rockwell Automation and Schneider.Programming of Siemens, Rockwell
  • Automation and Schneider HMI and SCADA systems.
  • Programming of DDC systems optimized for HVAC and Honeywell thermal fluid handling processes.
  • Migration of existing systems to new technologies.
  • Optimization and modification of existing systems.

Data acquisition and remote telemetry:

  • Interconnection of instruments and control system to ERP/MES systems.
  • Local and remote data acquisition in the cloud.
  • Telemetry and access via web intranet / internet to process variables.
  • Interconnection with databases.

 

Read More

Heat recovery from dust-loaded exhaust air. “Process Therm”

Process Therm recovers heat from dust-loaded air. The recovered heat is typically used for pre-heating incoming air, but can also be used to produce for example district heating. Process Therm can be installed in new plants or easily retrofitted into existing plants.

The open space between the thermo plates ensures that the Process Therm manages the dust-loaded air well, and that the unit can be run at a low air pressure drop(< 500 Pa). Condensation of moisture increases the amount of recovered heat and thereby gives you a faster return on investment.

The CIP nozzles on top of the exchanger ensure that plates are easy to clean without expensive interruptions during production.

Flowproen can deliver anything from a single Process Therm unit to a complete package including transition pieces, pre-heater and pump station for the circulation water.

We can also advise on other purposes of Process Therm like the production of district heating.

Product advantage: 

Maintenance-free in dust loaded air.

No expensive interruptions since cleaning takes place during production through CIP system.

Faster return on investment.

Low maintenance cost.

Compact design and simple installation.

Good thermal operating efficiency due to high heat transfer coefficients.

Enhanced heat recovery through condensation of moisture.

Long life due to stable and durable corrosion resistant materials.

Air flow from 000 to 300.000 kg/h.

Heat duty from 50 kW to 10 MW.

Fields of application: 

All processes with the presence of large amounts of dust in the discharge air (such as spray dryers)

For example in food, chemical, wood, paper and textile industries.

Read More

Energy saving relevance in argentine industries.

Energy saving relevance in argentine industries

Our CEO Andrés Barco will participate as a speaker on an online meeting organized by Argentine Portuguese Business Chamber.

The meeting’s name is Energy efficiency in Argentina: CABA and PBA look and energy saving as a solution in productive processes.

Wednesday 25/11 – 11hs (Arg)

Free activity with previous inscription and limited places.

👉 Save your place entering this link: https://lnkd.in/dJsdEwU

Read More

Food & Beverage.

This is the well-known process to sterilize the beverage. Heat it up to certain temperature and hold it to sterilize for a period (usually a few seconds to a minute) After that, it goes to be cooled down. Not only for the beverage, milk, milk product, soya, sauce, liquid, sugar, alcohol and any other liquor has also the same application.

Read More

Energy generation.

While LNG is gasified to use as a fuel, LNG is heated up by burning itself. Focusing on the latent heat of LNG, this heat can generate chilled water. Of course no longer burner is required. This idea is applicable not only for LNG, but also LN2, LHe, etc.

Read More
WhatsApp chat